A pocket-sized digital pet and step counter that keeps you moving and keeps you company. Developed by 1333 co. creator Kaiotei — your Angelgotchi is alive. Feed it, pet it, and keep up your steps or it'll need reviving. Neglect it too long and it'll wilt, so stay active and keep your angel happy!
Every Angelgotchi tracks your steps across daily, weekly, monthly, and all-time totals — all visible right on your device and logged through the Terminal.
Connect it to our website to log your stats and upgrade the firmware for more features! Participate in competitions and touch grass in style. Shipping to US included in pricing. International customers may need to pay S&H. Allow 4 days for assembly and 4 days for shipping.
This page is for purchasing and overviews only. The Terminal is where everything happens — flashing firmware, recording steps, uploading competition photos, and tracking your stats. Visit the Terminal →
Step Smarter
Tracks daily, weekly, monthly, and lifetime steps. Live progress on-screen celebrates every milestone — and your pet gets happier the more you move.
Always Connected
Sync your device through the Terminal to backup stats, unlock firmware drops, and join events. Seasonal quests and community leaderboards that evolve with you.
Real Digital Pet
Your Angelgotchi needs care — feed it, pet it, and keep moving. Neglect it too long and it'll fade. Revive it and it forgives you, but stay consistent and watch it thrive.
The original Angelgotchi — built on the Waveshare ESP32-S3 1.69" display board. A step counter and digital pet in one: feed it, pet it, and keep it alive with your daily movement. v1.3 served as the beta device for the first official step competition and photo scavenger hunt. The competition winner was DESIGNER DREAM.
✦ Key Features
Step Counter
Tracks steps via the onboard QMI8658 accelerometer/gyroscope. Displays daily, weekly, monthly, and lifetime step totals right on screen.
Digital Pet
Your Angelgotchi is a living companion. Feed it, pet it, and keep your steps up to keep it happy. Neglect it and it'll wilt — revive it and carry on.
Real-Time Clock
PCF85063 RTC chip with dedicated RTC battery connector keeps time accurately even when the main battery is off.
Buzzer
Onboard buzzer for audio alerts, focus reminders, and step milestone celebrations.
Wi-Fi & Bluetooth 5
2.4 GHz Wi-Fi (802.11 b/g/n) and Bluetooth 5 (LE) for syncing stats to the Terminal.
Li-Battery Charging
ETA6098 high-efficiency charging chip with MX1.25 2P connector. USB-C port for flashing and charging.
✦ Full Technical Specs
Processor / Memory
- ESP32-S3R8 SoC — Xtensa 32-bit LX7 dual-core, up to 240 MHz
- 8MB stacked PSRAM
- W25Q128JVSIQ — 16MB NOR Flash
Display & Controls
- Waveshare 1.69" capacitive LCD — 240×280 resolution, 262K colors
- Power function button — single/double/multi-click and long-press detection
- BOOT button
- RST reset button
Sensors & Peripherals
- QMI8658 6-axis IMU (3-axis gyroscope + 3-axis accelerometer)
- PCF85063 RTC clock chip
- Onboard buzzer (audio peripheral)
- Onboard chip antenna (2.4 GHz Wi-Fi + BT 5 LE)
Power & Connectivity
- ETA6098 high-efficiency Li-battery charging chip
- MX1.25 2P Li-battery connector (3.7V, charge/discharge)
- RTC battery connector (rechargeable RTC battery)
- Type-C port — ESP32-S3 USB for flashing and log printing
Competition submissions, step verification, and photo scavenger hunt entries for v1.3 all went through the Terminal. The Terminal is still the hub for all things Angelgotchi — firmware, steps, and photos live there, not here.
Available for order 4/3/26 — Fulfilled in 7 days <33
Angelgotchi v2 is a step counter, digital pet, and lofi nature camera all in one. Upgrade to a larger capacitive touch display, snap lofi photos for the nature scavenger hunt, and store everything on a TF card before syncing to the Terminal.
✦ Key Features
Step Counter
Tracks daily, weekly, monthly, and lifetime steps via the onboard QMI8658 IMU. Compete on the Terminal leaderboard with your totals.
Digital Pet
Feed it, pet it, keep it alive with your steps. Your Angelgotchi reacts to how you treat it — neglect it too long and you'll need to revive it.
Lofi Nature Camera
Snap grainy, beautiful lofi photos in the wild for the official nature scavenger hunt. Compatible with OV2640 / OV5640 — upload your shots to the Terminal to submit entries.
TF Card Storage
External TF card slot for storing photos, firmware files, and gameplay data locally before syncing.
Capacitive Touch LCD
2" 240×320 screen (262K colors) using ST7789T3 driver and CST816D capacitive touch controller via SPI/I2C.
Custom Faceplates
Unlock new faceplate art and themes through the Terminal. Event-exclusive designs drop with competitions and seasonal updates.
Firmware Updates
Flash new firmware, unlock event content, and customize faceplates — all managed through the Terminal.
✦ Full Technical Specs
Processor / Memory
- ESP32-S3R8 — Xtensa 32-bit LX7 dual-core, up to 240 MHz
- 512KB SRAM + 384KB ROM built-in
- 8MB stacked PSRAM onboard
- 16MB external Flash
Display & Touch
- 2" capacitive touch LCD — 240×320 resolution, 262K colors
- ST7789T3 display driver (SPI)
- CST816D capacitive touch controller (I2C)
Sensors & Expansion
- QMI8658 6-axis IMU (3-axis accelerometer + 3-axis gyroscope)
- Onboard TF card slot (external storage)
- Camera interface — OV2640 / OV5640 compatible
- 22 GPIO pins for peripheral expansion
Connectivity & Power
- 2.4 GHz Wi-Fi (802.11 b/g/n) onboard antenna
- Bluetooth 5 (LE) onboard antenna
- Type-C — power, flashing, and debugging
- 3.7V MX1.25 Li-battery charge/discharge interface
◆ Build Video — Angelgotchi v2
Watch the full assembly and build process for Angelgotchi v2. See how it comes together from bare board to finished device.
Angelgotchi v2 is built for the Terminal.
Flash your firmware, record your steps, upload competition photos, and track your progress — all at the
Terminal.
This page lets you buy one. The Terminal is where you use it.
Open Terminal ◆
The Angelgotchi v3.3 is the flagship — powered by the Waveshare ESP32-S3-Touch-AMOLED-1.75 board with a stunning AMOLED display, and designed to live on the back of your iPhone via a custom 1333 MagSafe backplate with charm keychain. It charges directly from your phone through a flat, low-profile USB-C cable — then detaches cleanly, leaving your case slim and sleek. Step counter, digital pet, and wearable companion all in one.
✦ Key Features
AMOLED Display
1.75" AMOLED capacitive touch screen — vivid colors, deep blacks, and crisp resolution. The sharpest Angelgotchi display yet.
Step Counter
Tracks daily, weekly, monthly, and lifetime steps via the onboard IMU. Syncs with the Terminal for leaderboards and competitions.
Digital Pet
Feed it, pet it, keep it alive. Your Angelgotchi wilts if you neglect it and bounces back when you revive it — stay active and it thrives.
MagSafe iPhone Case
Comes with a custom 1333 MagSafe backplate that snaps your Angelgotchi v3.3 to the back of your iPhone. Includes a charm keychain — it rides with you everywhere.
Charges From Your Phone
A flat, low-profile USB-C cable runs directly from your iPhone to your Angelgotchi. Charge it up, then unplug and detach — your case goes back to slim and clean, Angelgotchi in your pocket.
Firmware Updates
Like all Angelgotchi devices, v3.3 receives firmware updates, event unlocks, and new features through the Terminal.
✦ Full Technical Specs
Processor / Memory
- ESP32-S3 — Xtensa 32-bit LX7 dual-core, up to 240 MHz
- High-capacity PSRAM and Flash (see Waveshare wiki for full specs)
Display & Touch
- 1.75" AMOLED capacitive touchscreen
- High resolution, deep blacks, wide color gamut
- Touch controller via I2C
Sensors & Peripherals
- 6-axis IMU (accelerometer + gyroscope)
- RTC for timekeeping
- Onboard buttons — power, BOOT, RST
Connectivity & Power
- 2.4 GHz Wi-Fi (802.11 b/g/n) onboard antenna
- Bluetooth 5 (LE)
- USB Type-C — power, flashing, debugging
- Li-battery connector for portable operation
- Charges via flat low-profile USB-C cable directly from iPhone
Included Accessories
- Custom 1333 MagSafe backplate — snaps Angelgotchi to back of iPhone
- Charm keychain attached to the case
- Flat low-profile USB-C charging cable (phone → Angelgotchi)
- Detach when charged — case returns to low-profile
Full hardware specs: waveshare.com/wiki/ESP32-S3-Touch-AMOLED-1.75
◆ Build Video — Angelgotchi v3.3
The full v3.3 build video will be posted here when assembly is complete. You'll see the AMOLED board fitted into the custom shell and mounted to the 1333 MagSafe backplate — from bare board to iPhone-ready companion.
v3.3 runs on the same Terminal ecosystem as all Angelgotchi devices. Flash it, log your steps, upload your photos, and enter competitions — all at the Terminal. Purchases happen here. Everything else happens there.
Every unit is hand-assembled with love from the 1333 co. lab. Shipping is included for US orders. International friends, a small S&H fee may apply. Every unit is assembled within four days and ships within four more.
Got your device? Head to the Terminal. The Terminal is your hub for everything after purchase — flash your firmware, record your steps, upload competition photos, and join the leaderboard. 1333covenant.com/terminal →
◆ RESERVE YOUR DEVICE
✟ READY TO HATCH YOUR ANGELGOTCHI? ✟
Purchase above — then bring it to life at the Terminal where all the action happens.
Buy Your Device ✦ Go to Terminal ◆